XT & XTA Large Drill Attachment

SKU: LEX050

$945.00

Large Drill Attachment for the XT-3000 and XT-3000 Auto. Sharpens drills from 21mm to 30mm (13/16” – 1 3/16”).


Description

XT-3000 Large Drill Attachment – LEX050 – Compatible with both the manual and Automatic versions of the XT-3000 Sharpener.

The Large Drill Attachment allows you expand on the size range that your XT-3000 can sharpen. This attachment enables you to sharpen drills sized 21-30mm (13/16” – 1 3/16”) using the same easy to use sharpening technology. Large drills are expensive to replace, the LEX050 allows you to quickly and easily restore them toas sharp as new. The attachment includes a larger chuck, a larger sharpening port, as well as an additional alignment system for larger drills. Note, this attachment will sharpen but not split the large drills

XT & XTA Step Drill Attachment

SKU: LEX250

$695.00

The LEX250 Step Drill Attachment for the XT3000 and XT3000 Auto sharpeners allows you to sharpen step drills with a single step, often referred to as pocket drills.


Description

The LEX250 Step Drill Sharpener Attachment for the XT3000 and XT3000 Auto sharpeners allows you to sharpen step drills with a single step, often referred to as pocket drills. The LEX250 comes with an alignment assembly and a dedicated sharpening port and chuck. The included chuck holds drills from 1/8″ to 31/64″, and there is an optional chuck for holding larger step drills from 31/64 to 13/16″ – part number for the optional larger chuck is SA16980TA.

XT & XTA Countersink Attachment

SKU: LEX150

$695.00

Countersink Attachment for the XT-3000 and the XT-3000 Auto


Description

The Countersink Sharpening attachment expands the capabilities of the XT-3000 drill sharpener and allows the user to sharpen various styles of countersinks by simply replacing the drill sharpening port with the attachment.  No tools are required to make this change, and no set-up or recalibration required.  Countersinking holes, and de-burring cause wear to the tools which can be quickly and easily re-sharpened using the LEX-150.  The LEX -150 can sharpen single lip counter sinks as well as Weldon style. 3 and 6 fluted cams are available.

XT & XTA 90 Degree Attachment

SKU: LEX300

$695.00

90 Degree Attachment for the XT-3000 and XT-3000 Auto


Description

90 Degree Point Attachment – LEX300

The 90 Degree Attachment enables the user of the XT-3000 drill grinder to sharpen drills with a 90 degree point angle. 90 degree drills are critical to many machining applications, and must be sharp to achieve desired results. The LEX300 sharpens them to within ANSI standards quickly and easily. A chuck for sharpening 3-12mm drills is included with an optional 12-21mm chuck available (part number SA16880TA).