Ignite Clamp
The Ignite Clamp is our solution to holding parts of all shapes and sizes. With the ability to position the clamp at any angle along the T-Slot, square or odd shapes can be held with ease. The wedge clamp design actively pulls downward as the clamp is engaged while simultaneously applying lateral force. This downward force creates a stable condition for machining with no chance of lifting, vibrations, or movement.
Shims can be placed under the part when drilling through is necessary, or to provide more clearance for machining the entire part. Fully supporting the workpiece in this way dampens vibrations. By shimming the workpiece up, less teeth can be engaged if desired allowing a low profile hold. This heavy duty clamp can replace a whole drawer full of less robust clamps.
.
- Assembly Includes
-
52 HRC Hard Jaw Black Oxide
-
4140 Steel Clamp Body Black Oxide
-
Low Profile 3/18-16 Screw
-
5/8" T-Nut
-
1/2-13 Screw
Made In USA
PATENTS 11338401 | 11338402
Customer Reviews
Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
they held real good with the 2” diameter inserted drill going 5.25” deep in 1045!!
L
big fan of these clamps!! highly recommend!
