Installation-No special tools are needed to install

1.To Start-Measure the length you need and trim with a utility knife.

2.Preparation-Apply a rust preventative to the t-slot and along the cover, this protects your bare metal surfaces and aids in installation. We recommend LPS3 or similar.

3.Installation-Pinch the flexible legs and press straight down into the t-slot. If the Chip Guard is difficult to install, place one end in the t-slot. Next, pull the opposite end with your free hand and begin pressing the Chip Guard along the groove from the starting side. Stretching the Chip Guard in this way reduces its width for the perfect fit. We prefer to press the Chip Guard until it is flush with the t-slots chamfer. The compressed silicone will retain itself for a very secure hold.