Very happy with the purchase. I now have 16 of these. They work great.
The Octane t slot chip guard is great, very heat and chip resistant, and a great addition to any mill. Highly recommend it.
3/4" HSS DRILL SHARPENED WITH THE XT-3000 AUTOMATICALLY
The XT-3000 is available with an automated sharpening system. This system allows you to increase productivity by controlled cycle times and pre-drill set up. Assembled in the USA from US and imported parts.
The XT-3000 is available with an automated sharpening system. This system allows you to increase productivity by controlled cycle times and pre-drill set up. The XT-3000 Auto drill sharpener makes sharpening drills even easier. After aligning the drill, simply insert the chuck into the sharpening port and press start. The LCD screen displays valuable information and can be set to display in 5 different languages. You can purchase the automated sharpening system inclusive with a new XT-3000 or as an attachment to use to your current XT-3000 model.
A 1-Year Warranty covers defects due to workmanship and design, excluding abrasives. Warranty valid in USA and Canada only.
NOTE: Using a 115V machine in a location with 230V power sources voids the warranty.
Add your full-width text here.
| Technical Specifications | |
|---|---|
| Standard Grinding Wheels: | 180 Grit CBN - HSS, Cobalt & 180 Grit Diamond - Carbide |
| Max Wheel Diameter: | 6.45 inch ( 164 mm) |
| Arbor Size: | 1.25 inch (31.75 mm) |
| Wheel Surface Speed: | 75 ft/sec (23m/sec) for 60 Hz Model 115V |
| Motor Specs: | ¼ hp - 2850 rpm – 60 Hz |
| Operating Time: | Continuous Duty |
| Voltage: | 115 VAC +/- 10% |
| Frequency: | 60 Hz +/- 5% - Model 115V |
| Sharpener Current: | 2.5A Run / 40A Start |
| Operating Temperature: | 40° to 95° F ambient (4° to 35° C) |
The Darex XT-3000 Xpandable Drill Sharpener sharpens standard and split point drills at any angle
from 118 to 150 degrees. It sharpens drills sized from 3mm to 21mm. (.118 - .826)